Pressure wash plastic film rigid waste scrap heavy duty washing machine manufacturer for raffia bag, HD, LD, MLP, PP, PVC etc in Ahmedabad, Gujarat, India
Pressure wash is designed for very dirty plastic waste materials, even oil covered & sticky material which is very difficult to wash in a normal washer. The machine washes the plastic waste at high pressure and high rotational thrashing power to remove the toughest of the stains, dirt and grease.
Plastic film waste pressure washing machine specifications:
Plastic waste pressure washing drive system-
- Driven by a pulley belt system, which reduces the shocks of high load and thus reducing damage in the long run.
- Rotor is carefully designed and precision balanced for minimised vibrations.
- High thrashing capabilities bring requirements of a rigid and robust drive system which have been the core requirement while designing this machine for best results and long life.
Plastic waste pressure washing system-
- The whole operation of the machine is batch to batch to maintain optimum pressure of operation.
- Heavy rotor roller with thrashing action. The stationary blades (not sharp) are embedded on the side of the drum. These create an anti-spin action against the rotor thus thrashing the material in different directions enabling a high ratio of cleaning for the same amount of run time.
- A fully waterproof chamber with an vent to optionally add detergent in case of heavy greasy or chemical laden material.
- The water inlet lies at the top part of the drum. It is drained before the ejection of clean material. The water in normal cases is just dirty with no chemicals and thus can be filtered with normal ETP. Only in the presence of chemicals (depending upon what type of plastic you would like to wash), it needs to be treated properly.
Plastic waste pressure washer construction –
- Heavy MS body with precision cut spaces for smooth operation.
- The drum has two layers of containment to allow water to escape with impurities.
- Precision cut rotor and base drum to prevent pressure leakage during operation.
- Material ejection valve placed directly at a base level to allow quick release of material with least leftovers preventing repetitive wash and thus conserving overall power.
Plastic waste pressure washing machine is Suitable for material types-
Any type of plastic film / small rigid article waste can be processed through this setup.
- PP, raffia bags
- HD / LD film waste
- MLP film waste
- BOPP, etc
- Any thick walled rigid plastic up to 1” thickness and in form of small 15-20 mm pieces
- Jumbo Bags (without belt)
- Injection/blow moulding articles (grinded)
- PVC / HDPE pipes (grinded)
- PET flakes
- Jerrican / Jerrycans flakes
- PVC profile flakes
- HIPS sheets (grinded)
- Bucket scrap
- ANY TYPE OF GREASY, OILY PLASTIC MATERIAL
| Model | H.P. | Water Pump (H.P.) | Kgs/hr Inj./Blow/Mold. | Kgs/hr Film |
| PW-30 | 30 | 1.5 | 200 to 300 | 100 to 125 |
| PW-60 | 60 | 2 | 400 to 500 | 200 to 300 |
*Capacity Depend on Material & Feeding System
How the plastic waste pressure washing machine works:
- This machine setup only requires one human worker to run at maximum continuous production rate. He /she is both the operator and the material loader.
- The dirty plastic film waste (possibly laden with oil, grease or chemicals) is fed into the drum from the feeding hatch.
- Once the dirty material is loaded the waster inlet is opened to fill it till the required amount.
- If the material is extremely greasy, oily or laden with chemicals, an inlet vent is provided to insert detergent or washing catalyst. This is an optional step depending upon the type of your material and its condition before washing.
- Now all the valves are shut tight and the machine is started. The amount of time for each batch depends upon the type and condition of the material.
- After the batch time is up, the water drain valve is opened. This releases all the dirty water leaving behind clean material.
- While the main rotor is still spinning the material ejection valve is opened releasing the material out quickly without any leftovers.
- This machine is carefully designed for extremely dirty plastic waste which cannot be easily washed by normal machines.
Why choose Dollplast Machinery as the manufacturer of plastic waste pressure washing machine for your needs:
- We are the pioneers when it comes to plastic waste washing lines with hundreds of installed plants and best machine setups in the market. We offer unparalleled efficiency, compactness, output and quality at extremely economical costs.
- Having the widest range in plastic recycling machinery, Dollplast has been one of major manufacturers, suppliers & exporters for heavy duty plastic waste washing machines
- Dollplast plastic waste recycling machine manufacturing company with over 30+ years of total experience in the Machinery manufacturing industry, offers quality tested latest advanced features in machines at a reasonable cost.
- We have designed and developed the machines with field expertise and technical knowledge taking into consideration the difficulties and problems being faced by the processors in day-to-day operations.
- Dollplast started its new manufacturing facility at RAKANPUR, Ahmedabad (West) in the year 1995. Gaining experience of more than Two decades, now it is one of the most trustworthy manufacturers and solution providers of the plastic recycling machinery with world recognition. Dollplast has exported different types of Machinery and equipment to around 20 countries.
Milestones:
- Plasticon Award 2015 (Innovative In recycling Technology)
- Sujana Excellence Award 2013 (Innovation in Engineering Technology)
- Plasticon Award 2012 (Innovative in Recycling Technology)
- Top SME – 100 Award 2012 (Small & Medium Enterprise)
- National Award 2011 by Govt. of India (Innovative Technology in Plastic Waste management)
- National Award 2011 by Govt. of India (Mix Plastic Waste to Plastwud)
- Plasticon Award 2005 (Innovative In recycling Technology)
